Cd Player Operation - Optimus 120-2152 User Manual

(AM for AM, or FMI or FMII for FM).
2. Press TUNE/SEEK TRACK ATP until AS appears on the display.
Note:
Do not hold down TUNE/SEEK TRACK ATP.
automatically scan and store the first 6 strong stations it finds into
its automatic travel programming memory.
3. Press the desired memory channel button.
Note:
If the stereo could not find 6 strong stations, - - - appears on the
display if you try to tune to a vacant memory channel.
Scanning Stored Stations
The radio can scan all stored stations in the selected band, pausing for
5 seconds at each station.
To start scanning stored stations, repeatedly press BAND to select the
desired memory group, then press P-SCAN.
To scan the stations in the automatic travel programming memory, press
BAND to select the desired band, press TUNE/SEEK TRACK ATP so AS appears
on the display, then press P-SCAN.
As the radio scans each memory channel, the channel number flashes and the
frequency is displayed.
returns to the original station.
To stop the scanning when the radio pauses at a station you want to listen
to, press P-SCAN again.

CD PLAYER OPERATION

Cautions:
Play only CDs that have this mark on them:
The CD player has a wide dynamic range.
stereo's volume up too high during soft (low volume) sections of a
program, your speakers might be damaged when a sudden loud passage
occurs.
After scanning all memory channels, the stereo
This causes the stereo to
As a result, if you turn your