Pre S Su R Ep Ad A R M - TANDBERG 3400 X Service Manual

.A\
;\
a
The lifting arms for the drive belt should be
adjusted when the joystick is in NEUTRAL (nrid-
position). Adjust for I mm clearance with flat
pliers as shown in Figure 3.10. Adjust A first and
the B.
3. 6
P RE SS URE P A D A R M
With the joystick in the ) position, the tension
from the pressure pad arm against the bracket
should be between 80 and 100 g. This pressure
should be measured as shown in Figure 3.11.
Adjust by bending spring A which presses the
pressure pad arm against the head. Check that the
pressure pad arm is parallel when it meets the
bracket.
Fi9.3.10. Adjusting the clearance on the driue belt
Fig.3. 1 1. lvleasuring the pressure-pressure