3.3
AD J US TI NG T HE W I N D IN G F O R CE
f-x
!
&t
. .d 5 "
t l
U,
Adjusting the reel turntables.
The winding force is determined by the springs A.
See Figures 3.5 and 3.7.If the tension and the
springs do not change, the winding force is deter-
mined by the play on the reel turntable and the
clutch leaver. If the tension is still not correct after
adjusting the play, replace the spring A.
With the joystick in the FREE position, the play
on the turntable should be between 0.5 and 1 mm
as shown in Figure 3.4. The play on the left turn-
table can be adjusted by turning the nut on the
turntable spindle. The play on the right turntable
can be adjusted by turning the turntable pulley.
NOTE! If the turntable pulley (right turntable)
must be unscrewed from the turntable it should be
glued into position after the play has been adjusted.
Fig, 3.4
Checking the play on the turntables
!
[-r
vd
A\
/ /\L\ \
l V -: " )
\
*.-<^t
,/
-'-AE-/
6
w
A
W -L-r--,\ - \\
\\ - \i)+Z-
//
n WZ
d A.t?
d\?=
,^
EH
- €
R
\vl
a-l
==-'*\
@9':'
€
a
The supply turntable
fil
Fig. 3.5