Starting the Engine
1. Pull the blade control bar to the handle (Figure 15).
2. Turn the ignition key (model 20796 only) (Figure 16)
or pull the recoil start handle (Figure 17).
Note: If the mower does not start, contact an
Authorized Service Dealer.
Figure 15
Figure 16
Figure 17
Using the Self-propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 18).
Stopping the Engine
Release the blade control bar (Figure 19).
Important: When you release the blade control
bar, the blade should stop within 3 seconds. If
it does not stop properly, stop using your mower
immediately and contact an Authorized Service
Dealer.
10
Figure 18
Figure 19