Safety And Instructional Decals - Toro 51486 Operator's Manual

12in cordless trimmer
Table of Contents

Advertisement

damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
G. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
H. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
I.
Keep guards in place and in working order.
5.
Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
6.
Battery Safety
A. Do not charge appliance in rain, or in wet locations.
B. Do not use battery-operated appliance in the rain.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace
any decal that is damaged or lost.
Symbol
DC
V
Name
Direct current
Volts
ID-1009
121-7614
C. Use only the following type and size battery: Toro battery
model 88504.
D. Remove or disconnect the battery before servicing, cleaning,
or removing material from the gardening appliance.
E. Do not dispose of the battery in a fire. The cell may
explode. Check with local codes for possible special disposal
instructions.
F.
Do not open or mutilate the battery. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may
be toxic if swallowed.
G. Exercise care in handling batteries in order not to short the
battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
H. Charging time will be increased if the battery is charged when
the temperature is not between 41 to 104 degrees F (5 to 40
degrees C).
SAVE THESE INSTRUCTIONS
Designation/Explanation
Type of current
Voltage
1. Warning
2. Read the
Operator's
Manual.
2
121-7612
3. Do not
4. Wear eye
use in wet
environments.
protections.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents