Operation Panel - Sony HSC300RF Operation Manual

e INTERCOM connector (XLR 5-pin)
Connects to an XLR 5-pin headset for input and output of
intercom audio signals.
f EARPHONE jack (stereo minijack)
Connects to an earphone for output of the intercom audio.
g Connector panel (see Connector Panel (page 11))
h CAMERA POWER switch and indicator
CCU: Operates the power supply from the camera control unit.
EXT: Operates the power supply from the DC IN connector.
The indicator is lit in green during operation.
It is lit in red while standby power is being supplied from the
CCU, even if the switch is set to OFF.
Note
When a CCU is connected, external power supply (EXT)
cannot be used.
i CALL button
When pressed, the red tally lamp of the connected external
control device (RCP/RM, MSU, etc.) will light. Use to call the
operator of the external control device.
j Shoulder pad
You can adjust the position forward or backward.
For details, see "Adjusting the Shoulder Pad Position" on page
16.

Operation Panel

UC type: Model for NTSC areas
1
RET1
PGM1
LEVEL MIC
REAR ON
FRONT OFF
INCOM
PROD
ENG
INTERCOM
6 7
a RET 1 (return video 1) button
The return video signal is displayed on the viewfinder screen
while the button is held pressed.
b RET (return video) button and 2/3/4 (return video 2/3/4)
select switch
When other return video systems are used in addition to return
video 1, the signal selected with the 2/3/4 switch is displayed
on the viewfinder screen while holding the RET button
pressed.
Note
The RET 1 button has priority over the RET (2/3/4) button if
both buttons are pressed.
10
Locations and Functions of Parts
2 3 4 5
RET
2 3 4
PGM2
ASSIGNABLE
DISPLAY
OFF
MENU
EARPHONE
8 9
c DISPLAY/MENU switch
This switch functions the same as the DISPLAY/MENU switch
on the front (page 8).
d ASSIGNABLE button
You can assign a function with ASSIGNABLE REAR on the
<SWITCH ASSIGN1> page of the OPERATION menu.
e Menu control knob (rotary encoder)
This knob functions the same as the menu control knob on the
front (page 9).
f LEVEL/MIC (intercom level control/microphone)
switch
To determine whether to use the INTERCOM LEVEL knob
(page 9) on the front and to turn the intercom headset
microphone ON/OFF.
Switch position INTERCOM LEVEL
knob on the front
REAR/ON Inactive
REAR/OFF
FRONT/OFF Active
g Line select switch
To select the intercom line:
PROD: Producer line
ENG: Engineer line
h INCOM (intercom) level knob
To adjust the intercom audio listening level.
i PGM1 (program 1) and PGM2 (program 2) knobs
To adjust the audio listening level of program 1 or program 2,
respectively.
CE type: Models for PAL areas
1 2
RET1 RET
PGM1 PGM2
MIC
LINE
PROD
OFF
ENG
LEVEL
ENG PROD TRACKER
REAR
FRONT
INTERCOM EARPHONE
6 7 8 9 0
1 to 5 are the same as those of the UC type.
f MIC LINE (intercom microphone line) switch
To select the talk line for intercom:
PROD: To talk over the producer line
OFF: To turn off the headset microphone for the intercom line
ENG: To talk over the engineer line
g LEVEL switch
REAR: The intercom audio listening level is adjusted with the
ENG or PROD knob on this panel.
FRONT: The levels adjusted on the rear panel can be totally
adjusted with the INTERCOM LEVEL knob on the front.
h ENG (engineer line) knob
To adjust the intercom audio listening level of the engineer line.
Headset microphone
ON
OFF
3 4 5
2 3 4
ASSIGNABLE
DISPLAY
OFF
MENU
qa