Remove The Base Assembly For Vesa Mounting - Philips 288P6 User Manual

2. Setting up the monitor
2.4 Remove the Base Assembly for
VESA Mounting
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Loosen the assembly screws, then detach
the neck from the monitor.
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
100mm
12
100mm