Table of Contents
Advertisement
Quick Links
C12 Commercial
Cleaner
Read these instruc-
tions before operating
cleaner
Index
Assembling Cleaner ..........................2-5
Cleaner Descriptions ............................5
How To Use ........................................5-6
If You Have a Problem ..........................8
Important Safeguards ..........................1
Lubrication ............................................8
Authorized Service............................9
Replacing Agitator ............................8
Replacing Belt ................................7-8
Replacing Filter Bag ......................6-7
Unpacking Cleaner ..............................2
DOUBLE INSULATED: When servic-
ing, use only identical replacement
parts
© 2001
Serial Number_______________________
(Located on bottom of cleaner as shown)
Important Safeguards
When using an electrical appliance, always follow
basic precautions, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
Warning:
• Do not use outdoors or on wet surfaces.
• This appliance is provided with double insulation. Use only identical replacement
parts. See instructions for servicing double insulated appliances.
• Close supervision is necessary when any appliance is used by or near children.
Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.
• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,
rotating agitator and other moving parts. Do not operate cleaner in bare feet or
when wearing open toe shoes or sandals.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or
hot ashes.
• Do not use to pick up flammable or combustible liquids such as gasoline or fine
wood sandings or use in areas where they may be present.
• Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner
and the bag.
• Do not use without dust bag or filters in place. Change bag frequently when picking
up very fine materials such as powder.
• Use extra care when cleaning on stairs.
• Do not put any object into openings. Do not use with any opening blocked; keep
free of dust, lint, hair, or anything that may reduce air flow.
• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord
around sharp edges or corners. Do not run appliance over cord. Keep cord away
from heated surfaces.
• Always disconnect cord from electrical outlet before servicing the cleaner.
• Unplug cleaner when not in use. Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never
handle plug or appliance with wet hands.
• The use of an extension cord is not recommended.
• Do not use with damaged cord or plug. If appliance is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water, take it to a Triple S
Authorized Dealer.
• Use vacuum cleaner only for its intended use as described in the instructions.
Use only attachments recommended by Triple S; others may cause hazards.
Save these instructions!
Operating Instructions
ENGLISH
pp.1-9
ESPAÑOL
pág 10-14
FRANÇAIS
p. 17-21
To reduce the risk of fire, electric shock, or injury:
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Triple S C12
Summary of Contents for Triple S C12
-
Page 1: Table Of Contents
• The use of an extension cord is not recommended. • Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Triple S Authorized Dealer. -
Page 2: Assembling Cleaner
Assembling cleaner It is extremely important to read and follow all instruction steps in order. The assembled cleaner will look like this drawing. Carton contents A. Upper handle B. Lower handle C. Cleaner body D. Outer bag E. Cord F. Filter bag G.Handle bolt and nut packet (One extra nut included) H. - Page 3 Step 1 Assemble handle Note: The white switch lock above the ON-OFF switch (A) helps in the assembly of your cleaner. Assembly can be con- tinued if the switch lock is missing. However, do not remove Align upper handle and lower handle as shown. the switch lock until assembly is completed.
- Page 4 Step 3 Attach cloth outer bag Note location of tapered rails (A) on The hole (E) in the handle is visible Slide rails on outer bag (B) onto rails back of outer bag base (B) and on through the U-shaped extension on on lower handle (C) until outer bag front of lower handle (C).
-
Page 5: Cleaner Descriptions
Step 5 Attach filter bag CAUTION: When the cleaner is turned ON, the agitator continues to rotate while the handle is in the upright posi- tion. Hold filter bag collar (A) as shown. Align opening in filter bag with dirt tube (B) inside the outer bag. -
Page 6: Replacing Filter Bag
Filter bags may be purchased from a carpet due to rapid accumulation of car- Disconnect cleaner from electrical Triple S Authorized Dealer. pet fluff. outlet before attempting to service it in any manner. CAUTION: Very fine materials, such... -
Page 7: Replacing Belt
The belt The belt on your cleaner causes the agitator to rotate and is important for the effective operation of the clean- er. The belt is located under the bot- tom plate of the cleaner and should be checked from time to time to be sure it is in good condition. -
Page 8: If You Have A Problem
The agitator is equipped with two • Filter bag full ball bearings that should be lubricat- • Change filter bag Possible cause ed periodically by a Triple S Autho- Possible solution rized Dealer. • Not firmly plugged in • Plug unit in firmly •... -
Page 9: Maintenance Authorized Service
Service To obtain approved Triple S service and genuine Triple S parts, contact a Triple S Authorized Dealer. Always identify your cleaner by the complete model number when requesting information or ordering parts. (The model number appears on the bottom of the cleaner.)
Need help?
Do you have a question about the C12 and is the answer not in the manual?
Questions and answers