Toro 74952 Operator's Manual page 37

4. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark
A
C
E
5. Start the engine and drive to a flat area. Check the oil
level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
Note: Change the engine oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to
Engine Oil (page 36).
2. Change the engine oil filter
(Figure 48).
B
D
F
g027660
Figure 48
Changing the
(Figure 49).
A
C
E
g027477
Note: Ensure the oil filter gasket touches the engine
and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil; refer
to Changing the Engine Oil (page
37
B
D
F
3/4
Figure 49
36).
G008804