Tilting the Mower
The mower can be tilted up for ease of service or to
shorten unit length for transport and storage.
To Raise Mower
1.
Lift or push down on side of carrier frame to
release weight on latch pin.
2.
Pull out on latch pin to release and rotate into
notch to hold in the open position (Fig. 14).
Repeat on the other side. Lower rear of mower
onto rollers.
3.
Rotate latch pins into released position after
deck has been lowered onto rear rollers.
4
5
3
2
Figure 14
1. Parking brake
2. PTO cover
3. Latch pin
4.
Standing in front of the mower, lift up and push
rearward on front to raise mower (Fig. 15).
5.
Raise mower until it contacts stops and latch
pins snap into locked position.
1
4. Notch–open
5. Locked Position
1
Figure 15
1. Mower up
Operation
m–3375
27