Seat LEON Owner's Manual page 103

Removing the bulb holder
Fig. 118 Remove the cover from the boot lid.
Fig. 119 Remove the lamp holder
The rear lid must be open to change the
bulbs.
Remove the rear lid cover in the direction
–
›››
indicated Fig. 118.
Unlock the retaining tabs
– A
holder, following the direction of arrows
›››
Fig. 119.
and
2
Remove the bulb holder by turning it in the
–
direction of arrow
Changing the bulbs
Position of the bulbs in the bulb
Fig. 120
holder
Lightly press the defective bulb into the
–
bulb holder
the left
2
Fit the new bulb, pressing it into the bulb
–
holder and turn it to the right as far as it
will go.
Use a cloth to remove any fingerprints from
–
the glass part of the bulb.
Check that the new bulb works properly.
–
Replace the bulb holder.
–
of the bulb
1
Fuses and bulbs
›››
Fig. 119.
3
›››
Fig. 120 , then turn it to
1
and remove it.
Note
For LED pilots, you can only change the fog or
reverse bulb, on the left or right guide.
Fitting the bulb holder
Install the bulb holder making sure that
–
›››
locking clips Fig. 119 are properly
A
clipped on.
Replace the cover of the rear lid lining
–
›››
Fig. 118.
101