Controlling Your Ipod - Onkyo TX SR308 Instruction Manual

Av receiver

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Note

• Enter the appropriate remote control code before using the AV

receiver's remote controller for the first time

• Connect the RI Dock to the AV receiver with an u cable

(➔

37).

• Set the RI Dock's RI MODE switch to "HDD" or "HDD/

DOCK".

• Set the AV receiver's Input Display to "DOCK"

■

System Function

System On

When you turn on the AV receiver, the ND-S1, RI Dock

and iPod turn on automatically. In addition, when the

ND-S1, RI Dock and iPod are on, the AV receiver can be

turned on by pressing ON/STANDBY.

Auto Power On

If you press the remote controller's 1 while the AV

receiver is on Standby, the AV receiver will automatically

turn on, select your iPod as the input source, and your

iPod will start playback.

Direct Change

If you start iPod playback while listening to another input

source, the AV receiver will automatically switch to the

input to which the ND-S1 and RI Dock is connected.

Other Remote Controllers

You can use the remote controller that came with the AV

receiver to control other iPod functions. The available

functionality depends on the AV receiver.

iPod Alarm

If you use the Alarm function on your iPod to start play-

back, the AV receiver will turn on at the specified time and

select your iPod as the input source automatically.

Note

• Linked operations do not work with video playback or when the

alarm is set to play a sound.

• If you use your iPod with any other accessories, iPod playback

detection may not work.

• This function only works when the Standard mode is set to On.

■

Operating Notes

• Use the AV receiver's volume control to adjust the playback

volume.

• While your iPod is inserted in the ND-S1

volume control has no effect.

• If you do adjust the volume control on your iPod while it's

and RI Dock

inserted in the ND-S1

set too loud before you reconnect your earphones.

Note

• On the 5th generation iPod and iPod nano, the click wheel is

disabled during playback. For ND-S1, use iPod to start and stop

playback and the remote controller to control other iPod func-

tions.

By pressing REMOTE MODE that's been programmed

(➔

41).

with the remote control code for your Dock, you can con-

trol your iPod in the Dock with the following buttons.

See

See to the Dock's instruction manual for more informa-

20).

(➔

tion.

■

PORT is preprogrammed with the remote control code for

controlling a Dock with Universal Port connector.

You can control your iPod when "PORT" is selected as

the input source.

Without the RI Control

You must enter a remote control code 82990 first

■

• Set the ND-S1 iPod/PC mode to "iPod".

■

• Set the RI Dock's RI MODE switch to "HDD" or

• ON/STANDBY may not work with a remote control

With the RI Control

In this case, make an u connection and enter a remote

control code 82351 (with u).

• Set the AV receiver's Input Display to "DOCK"

and RI Dock

, its

, be careful that it's not