Installation - Electrolux EC2331AOW User Manual

Problem
9.1 Customer Service
If your appliance is still not working properly
after making the above checks, contact the
nearest service centre.
To obtain fast service, it is essential that
when you apply for it you specify the model
9.2 Replacing the lamp
WARNING!
Do not remove the lamp cover at
the time of replacement.
Do not operate the freezer if the
lamp cover is damaged or missing.

10. INSTALLATION

10.1 Positioning
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the lid, you must ensure that it is
made unusable to prevent young
children being trapped inside.
The appliance shall have the plug
accessible after installation.
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar), but
for optimum performance install this appli-
ance at a location where the ambient tem-
perature corresponds to the climate class
Possible cause
There is no voltage in the
mains socket (try to con-
nect another appliance into
it).
and serial number of your appliance which
can be found either on the guarantee certif-
icate or on the rating plate located on the
external right side of the appliance.
1.
2.
3.
4.
indicated on the rating plate of the appli-
ance:
Cli-
mate
class
SN
N
ST
T
10.2 Electrical connection
Your appliance must be connected to a
single-phase supply of 230 V. Check that
Solution
Call an electrician.
Disconnect the mains plug from the
mains socket.
Replace the used lamp with a new
lamp of the same power and specifi-
cally designed for household applian-
ces. (the maximum power is shown on
the lamp cover)
Connect the mains plug to the mains
socket.
Open the lid. Make sure that the lamp
comes on.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
ENGLISH 13