Main Features And Controls - BuildClean 512000 Operating Manual

Main Features and Controls

Top Cover
Auto Dust Sensor
Power Status Display
Dust Sensor Status Light
Control Knob
Main Power Switch
(located at rear of unit)
Durable Plastic Housing: The BuildClean HEPA
360° Air Scrubber has a durable plastic housing built
especially for the rigors of construction work. It is easy
to clean and resists scuffing and denting.
360°Design: Maximizes particle collection, allows
multi-directional air collection and boosts efficiency.
Power Status Display: Indicates the status of
the unit - ON, OFF.
Dynamic Fan Speed Control: Improves efficiency
as the motor speed automatically adjusts to the filter
load to maintain desired CFM airflow.
Hour Meter: Counts and displays the number of
hours the Air Scrubber has been operating, allowing
you to confirm the amount of time the unit has been
used on a job.
Auto Dust Sensor Status Light: When
illuminated, this light indicates that the dust sensor
needs cleaning. See page 8.
4
Auto Dust Sensor: Allows the Air Scrubber to run in
"AUTO" mode. While in AUTO mode, the Auto Dust
Sensor automatically samples the air and adjusts
the fan speed accordingly. For example, when a high
level of particulate is sensed, the Auto Dust Sensor
will automatically run the Air Scrubber on HIGH until
a lower level of particulate is sensed or the unit is
powered down.
Advanced Two-Stage Filtration System:
1. Pre-Filter - The coarse pre-filter traps larger
particulates.
2. HEPA Filter - High Efficiency Particulate Air
(HEPA) filter traps 99.7% of particles down to 0.3
microns in size.
Filter Status Display: Stoplight-style red, yellow and
green LED display indicates the cleanliness of the
pre-filter and HEPA filter.
© 2014 ITW Renovation & Remodeling, a Division of Illinois Tool Works Inc.
Cover Latch
Pre-Filter
Filter Status Display
Hour Meter
Air Exhaust Vent