Configuring Light Sensor Settings - Datalux TM110 User Manual

Configuring Light Sensor Settings

The TM110 Tablet is normally configured for manual adjustment of the
brightness using the buttons on the left side of the unit. In order to use the
automatic brightness control, the light sensor function must be enabled.
Tap the Light Sensor tab to enable/disable the automatic light sensor function,
specify and adjust the brightness level.
Set the range of illumination settings.
To setup the light sensor settings, do the following:
• To customize the illumination range according to the ambient lighting, enter the
desired value in the first and second data box.
As an example in the above illustration:
- Outdoor (5000 ~ 500 lux)
- Indoor (500 ~ 50 lux)
- Low Light (50 ~ 0 lux).
• To adjust the brightness level according to the ambient light, tap
adjust the setting (0~10).
• To save all preset settings, tap Apply.
• To enable the automatic light sensor function, tap the Enable Auto Light
Sensor checkbox.
The system will automatically adjust the LCD brightness according to the
preset settings.
Current ambient
brightness reading
Current preset
brightness level
Tap to restore the
default settings.
Page 19
Operating Your Tablet PC
or to