Using The Remote Controller Rc-479S With Your Other Av Components - Onkyo TX-SR501E Instruction Manual

Using the Remote Controller RC-479S with Your Other AV
Components
RC-479S (not North America)
Connecting your
player, or cassette recorder to the TX-SR501/TX-SR501E
via allows you to control it with the TX-SR501/
TX-SR501E's remote controller. Since you only need to
point the remote controller at the TX-SR501/TX-SR501E,
you can control components that are out of sight, for exam-
ple, in a cabinet. See page 19 for connection information.
Note:
• To use the function, you must make an
and an analog RCA/phono connection between the AV
component and your TX-SR501, even if they are con-
nected digitally.
Using the RC-479S
1 Point the remote controller at the TX-SR501/
TX-SR501E and use the input selector but-
tons to select an input source for the
TX-SR501/TX-SR501E.
Power on/off
Start playback
Stop playback, fast forward, or fast reverse
Fast forward
Fast reverse
/ Pause playback
Go to next chapter or track
Go to beginning of current chapter or track
DISC Select a disc (DVD/CD changers only)
1–9, +10, 0 Enter numbers
TOP MENU Display the disc's main menu
MENU Display the last sub-menu
RETURN Return to previous menu
SETUP Display setup menu
Select menu items
/ / /
ENT Go to selected menu item
40
-compatible Onkyo CD player, DVD
DVD mode
3.
2.
DVD
4.
DVD
control
buttons
1.
DVD
input
selector
2
Use the remote controller's mode buttons
(i.e., [DVD], [CD], or [RCVR/TAPE]) to select
a remote controller mode.
(You don't have to point the remote controller at any-
thing for this step.)
3
Point the remote controller at the TX-SR501/
TX-SR501E and press the Power [
to turn on the AV component.
(A cassette recorder can't be turned on or off from
connection
the remote controller. However, pressing the remote
controller's Play [ ] button will turn it on and start
playback.)
4
Use the buttons as explained below.
In the following illustrations, buttons that control the
TX-SR501/TX-SR501E regardless of which mode is
selected are shaded.
CD mode
3.
2.
CD
4.
CD
control
buttons
1.
CD input
selector
Tape mode*
Play side A (front-facing side)
Stop playback, recording, fast forward, or rewind
Rewind
Play side B (rear-facing side)
* Since this is RCVR/TAPE mode, you can control
the cassette recorder and fully control the
TX-SR501/TX-SR501E at the same time.
] button
2.
RCVR/TAPE
3.
Tape control
buttons
1.
Tape input
selector