Maintenance; Recommended Maintenance Schedule(S) - Toro 74253 Operator's Manual

With a 60in or 72in turbo force side discharge mower
Hide thumbs Also See for 74253:
Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 25 hours
After the first 100 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 250 hours
Every 400 hours
Every 500 hours
Yearly
Yearly or before storage
Important: Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Change the engine oil.
• Check the engine cooling system level.
• Adjust the mower belt tension for 72 inch mower decks.
• Check the hydraulic fluid.
• Change the hydraulic filter.
• Change gear box oil.
• Check the safety system.
• Check the engine oil.
• Check the engine cooling system level.
• Clean the hyraulic oil cooler and radiator screen.
• Check the mower blades.
• Clean the mower deck.
• Grease the mower deck and spindles.
• Grease the mower belt idler arm.
• Grease the pump belt idler arm.
• Grease the drive belt idler arm.
• Grease the brake lever.
• Check the hydraulic fluid.
• Check the tire pressure.
• Check the PTO drive belt.
• Check the pump drive belt.
• Change the engine oil. (more often in dirty or dusty conditions)
• Check the spark plug.
• Check the wheel hub slotted nut.
• Check the gear box oil level.
• Check the engine cooling system hoses.
• Inspect the belts for cracks and wear.
• Check the hydraulic hoses.
• Lubricate the machine with light oil.
• Change the engine oil filter.
• Grease the brake pivot.
• Check or replace the air filter (more often in dirty or dusty conditions)
• Replace the fuel filters (more often in dirty or dusty conditions).
• Adjust the caster pivot bearing.
• Adjust the electric clutch.
• Grease the front caster pivots (more often in dirty or dusty conditions).
• Change the gear box oil.
• Change the engine coolant.
• Change the hydraulic filter and oil.
• Paint chipped surfaces.
• Perform all maintenance procedures listed above before storage.
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z580 z master74254

Table of Contents