Download Print this page

Vidao V7TAB16BT User Manual page 5

7” hd touchscreen tablet with bluetooth
Hide thumbs Also See for V7TAB16BT:

Advertisement

Available languages

Available languages

1.2. microSD Card
Your Tablet comes with 16GB of built-in memory for storage. Some of the
preloaded programs and the operating system will use approximately 2-3GB
of space. You can add up to an additional 64GB of storage space to your
device by using a SDHC or SDXC microSD card (not included). Data can be
saved to the built-in memory or to the microSD card. In addition files can also
be transferred to a microSD card from your personal computer and then
imported into your Tablet.
o To install the microSD card
o Insert the microSD card, making sure the gold contacts are
facing down.
o Push the microSD card in gently into the slot (2) until it locks
into place.
o To remove the microSD card
o Push in gently on the microSD card and it will pop out slightly
from the slot. Pull the card out of the slot. (2)
o Warning: Follow the instructions for safe removal of the
microSD card from the tablet. Improper removal of the microSD
card may cause data loss or unpredictable system issues. For
safe removal, tap > Settings > Storage >Unmount microSD
card.
1.3. Charging Battery
When you first receive your device the battery will only be partially charged.
To fully charge the battery, allow it to charge for 5 hours to ensure it's fully
charged before using the tablet.
1. Connect one end of the AC adaptor to the power jack (6) of the device.
2. Plug the other end of the AC adaptor into a wall outlet to start charging.
3. The red LED on the front of the device will turn off when it is fully
charged.
Tips: To increase battery life
• Lower the screen brightness
• Reduce the time until the device enters the Sleep mode
• Turn off the Wi-Fi when an Internet connection is not required
• Close any applications when finished using them or they will
continually run in the background.
• Turn your device completely off when finished using.
1.4. Turning the Device ON or OFF
o To turn ON your device:
o Press and hold the Power button (1) for at least 2 seconds until an
image appears on the screen.
o To turn Off your device:
1. Press and hold the Power button (1) for at least 2 seconds
 
5  

Advertisement

loading