Asus A88X-PLUS Owner's Manual page 25

2.2.1 EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press <F7> for
the advanced BIOS settings.
The default screen for entering the BIOS setup program can be changed.
Displays the APU/motherboard
temperature, APU voltage output,
APU/chassis fan speed, and
SATA information
The boot device options vary depending on the devices you installed to the system.
Chapter 2: BIOS information
Selects the display
language of the BIOS
setup program
Displays the APU Fan's
speed. Click the button to
manually tune the fans
Displays the system properties of the
selected mode. Click <Enter> to switch
Loads optimized
default settings
EZ System Tuning modes
Displays the
Shows the Advanced mode
bootable
devices
Saves the
Selects the boot
changes and
device priority
resets the system
menus
2-6