Asus Q170M-C User Manual page 76

Boot Logo Display [Auto]
[Auto]
[Full Screen]
[Disabled]
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Enabled]. This item allows
you to select the desired additional POST waiting time to easily enter the BIOS setup. You
can only execute the POST delay time during Normal Boot. The values range from 0 to 10
seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Auto] or [Full Screen]. This item
allows you to select a desired post report waiting time. Configuration options: [1 sec] ~ [10
sec] [Until Press ESC].
Bootup NumLock State [Enabled]
[Enabled]
[Disabled]
Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
Interrupt 19 Capture [Disabled]
This item allows you to trap Interrupt 19 by the option ROMs. Configuration options:
[Disabled] [Enabled]
Setup Mode [EZ Mode]
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add‑on devices for better compatibility.
2‑38
Adjust automatically for Windows® requirement.
Maximize the boot logo size.
Hide the logo during POST.
Sets the power‑on state of the NumLock to [Enabled].
Sets the power‑on state of the NumLock to [Disabled].
The third‑party ROM messages will be forced to display during the boot
sequence.
The third‑party ROM messages will be displayed only if the third‑party
manufacturer had set the add‑on device to do so.
This item allows you to go to EZ Mode of the BIOS after POST.
Chapter 2: Getting started