Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 100 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 200 hours
Every 250 hours
Every 300 hours
Every 500 hours
Every 1,000 hours
Every 2,000 hours
Maintenance Procedure
• Check the oil level in the wheel hubs.
• Check the oil level in the front and rear axles.
• Check the oil level in the transmission.
• Change the wheel hub oil.
• Change the oil in the axles.
• Change the oil in the transmission and rear axle.
• Check the engine oil level.
• Check the hydraulic fluid level in the reservoir.
• Grease the machine.
• Check the engine oil level.
• Check the restricted air-cleaner light for a restricted air cleaner.
• Check the tires and wheels for damage.
• Check the coolant level in the reservoir.
• Check and clean the dust valve.
• Check the fuel-water separator for water and sediment.
• Maintain the proper air pressure in the tires.
• Check the coolant level in the radiator.
• Grease the front and rear axles.
• Change the engine oil.
• Change the engine oil filter.
• Check the oil level in the wheel hubs.
• Check the oil level in the front and rear axles.
• Check the oil level in the transmission.
• Check the condition of the engine drive belt.
• Clean the axle breather for each axle.
• Check the condition of the coolant system components. Clean dirt and debris from
them and repair or replace the components as necessary.
• Grease the drive shaft.
• Replace the secondary fuel filter.
• Replace the primary fuel filter.
• Change the hydraulic-pressure filter.
• Change the hydraulic-return filter.
• Check and maintain the ROPS; check it after an accident.
• Change the wheel hub oil.
• Change the oil in the axles.
• Change the oil in the transmission and rear axle.
• Check the concentration of the coolant.
• Check the tension on the engine drive belt.
• Change the hydraulic fluid and clean the breather.
• Clean the cooling system.
33
Advertisement
Table of Contents
