Advertisement
4
In some cases while removing or reinstalling
doors, the hinge connectors can have the wires
come loose. Remove all plastic coating and
black tape from the Molex connectors, reseat
pins. This should correct Display Panel failures.
RF267AA**/XAA
Updates
This switch used in some early production units
In some cases while removing or
reinstalling doors the hoses and/or
coupling can be damaged. This will
cause a dripping condition at the
dispenser. Redress hose ends
and/or replace coupling with new
part number.
To Remove Panel: Insert
Small Screwdriver in Square
Hole at Bottom Right Corner.
Push Screwdriver to Left To
Release Tab
Reed switches are now used for
the Fridge, improper installation
can cause magnet and reed
switch not to line up. Use magnet
to test
To Remove
Freezer Drawer,
push plastic tab
on each track to
release tracks
and pull out
drawer to remove
4
Advertisement
