Key Changer; Lighting Effects; Party Thruster; Setting The Clock - LG CM9960 Owner's Manual

KEY CHANGER

You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
y To sharp the key one by one, press the KEY
CHANGER( ) repeatedly during playback.
y To flatten the key one by one, press the KEY
CHANGER( ) repeatedly during playback.
,
Note
y This function is available CD, USB or BT
(Bluetooth) Function.
y If a microphone is not connected, "NOT
SUPPORT" appears in the display window.
y To initialize it, change the Function, disconnect
the microphone or change the music.
y This function may not be initialized depending
on the status of connected devices.

Lighting Effects

This function offers a party atmosphere by operating
the lighting ball on the unit and the lighting on the
speakers.
Press LIGHTING on the unit.
OFF PEACEFUL ROMANTIC
UPBEAT FIERY EXCITED
HEALING SUNNY PARTY
,
Note
y Lighting function is available in all functions.
y Lighting mode retains its previous mode
when you first press LIGHTING, press again
to change modes.

PARTY THRUSTER

Slide the lever to create a party atmosphere.
PARTY THRUST OFF PARTY THRUST 1
PARTY THRUST 2 PARTY THRUST CLIMAX
The lighting ball on the unit, the lighting on the
speakers, the LED lighting and the sound effect
will react according to moving the lever of PARTY
THRUSTER.

Setting the Clock

1. Turn the unit on.
2. Press and hold CLOCK.
3. Select time mode by pressing C/V on the
4. Press SET to confirm your selection.
5. Select the hours by pressing C/V on the
6. Press SET.
7. Select the minutes by pressing C/V on
8. Press SET.
Setting the Clock through
"Music Flow Bluetooth" App
Install "Music Flow Bluetooth" app on your Android
device. (Refer to page 26)
Your unit' s clock will be automatically synchronized
with your device by activating Bluetooth connection
through "Music Flow Bluetooth" app.
COOL
DYNAMIC
Using your player as an alarm
OFF ...
clock
1. Turn the unit on.
2. Press and hold ALARM.
3. Press C/V on the remote control to
4. Press C/V on the remote control to select
5. Press C/V on the remote control to
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
remote control.
the remote control.
change the hours and minutes and press SET to
save.
function and press SET to save.
- Press C/V on the remote control to
select a memory No. when you select Tuner and
then, press SET.
If there is no memory No., this step is skipped.
change the volume and press SET to save. The
clock icon " ( " shows that the alarm is set.
Operating 35
3