Servicing The Blade - Toro Recycler 21131 Operator's Manual

g017679
7. Install the dipstick securely.
8. Recycle the used oil properly.

Servicing the Blade

Always mow with a sharp blade. As sharp blade cuts the grass
evenly, without tearing or shredding the grass.
When you replace the blade, use only genuine Toro
replacement blades.
WARNING
Someone could accidentally start the engine
and cause a serious injury to the operator or to
bystanders.
Do not attempt to inspect, remove, or replace the
blade without first disconnecting the spark plug
lead.
0.15 L
G017680
Figure 20
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the spark plug lead
3. Tip the mower onto its side.
4. Carefully examine the blade for sharpness and wear,
especially where the flat and curved parts of the blade
meet. If you notice wear, replace the blade.
Note: For best performance, install a new blade
before the mowing season begins. During the season,
file down small nicks on the blade to maintain its
cutting edge.
DANGER
A worn or damaged blade could break and a
piece of blade could be thrown in the operator's
or bystander's direction, causing serious personal
injury or death.
Inspect the blade periodically for wear or damage,
and replace a worn or damaged blade.
14
(Figure 21).
G017675
Figure 21