Rear Seat Armrest; Heated Rear Seats - Buick Envision 2017 Owner's Manual

Table of Contents

Advertisement

To raise the sliding seatback:
1. Pull on the lever on the side of
the seat cushion to release the
seatback from its locked
position.
2. Push the seatback rearward
until it locks in the upright
position.
3. Make sure the rear safety belts
are in the belt guide and are
not twisted or caught between
the seat cushion and the
seatback.

Rear Seat Armrest

If equipped, the rear seat has an
armrest in the center of the
seatback. Lower the armrest to
access the cupholders.
To fold, lift the armrest up and push
it rearward until it is flush with the
seatback.

Heated Rear Seats

WARNING
If you cannot feel temperature
change or pain to the skin, the
seat heater may cause burns.
See the Warning under Heated
and Ventilated Front Seats 0 56.
Seats and Restraints
If equipped, the buttons are on the
rear of the center console.
With the ignition in ON/RUN/START,
press
or
to heat the left or right
outboard seat cushion. An indicator
on the climate control display
appears when this feature is on.
Press the button once for the
highest setting. With each press of
the button, the heated seat changes
to the next lower setting, and then
the off setting. Three lights indicate
the highest setting, and one light
indicates the lowest.
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envision 2018

Table of Contents