Page 1
INsTRucTIoN MANuAl FAN HEATER Model No.: TFH LED...
Page 2
Dear Customer, Congratulations! You are now the proud owner of Usha Fan Heater (Model No.: TFH LED) Innovatively designed, using only the highest quality material and components, your Usha Fan Heater (Model No.: TFH LED) is designed for years of trouble free performance.
Usha service centre. • Improper repairs can expose the user to considerable danger. • The appliance may only be opened up and repaired by authorized Usha service centre personnel. • Do not store or use any flammable materials or sprays in the vicinity of the appliance when the appliance is in use. Fire hazard! • Do not use the appliance in flammable atmospheres (e.g. in the vicinity of...
• WARNING: in order to avoid overheating, do not cover the heater. • The appliance is not intended for use by children or infirm persons without supervision! • Young children should be supervised to ensure that they do not play with the appliance! • Attention! To avoid any danger due to unintentionally resetting the thermal cut-out, the appliance must not be supplied via a timer. • Disconnect from mains when not in use or cleaning.
• Fit the glass base onto the bottom of the unit and securely screw the base locknut. • The unit is now assembled and should be placed upright; always ensure it is placed on a flat floor or surface for use. pARTs DEscRIpTIoN opERATING INsTRucTIoN Firstly, plug in the appliance to a power source matching that on the units rating label. Power switch (located below the removable air filter at the rear of the unit) Press the power button to “I” position. You should hear a beep sound; the heater is now ready for use.
Page 6
Control Panel and display window STANDBY Press the standby “ ” key, the power indicator light will turn ON. The heater begins operation at low heat power - (LED indicator on the heating function shows “LOW”). Press this key again and all functions will stop. The LED indicator turns off and the unit is back in standby mode. HEAT When the unit is operated at low heating power, press the “...
During this 5 second interval changes can be inputted by pressing the “+” or “-” keys. However if after pressing the set key “ ” no further buttons are pressed the unit will return to display the room temperature and to make further changes the process needs to begin again. A: Setting the timer: Press the key, the light will show “0 H”, then press the “+” or “-”keys to set the working time, (within a range of 1-12 hours).
Battery replacement in the remote control • Slide out the battery holder at the rear of remote control. (Picture 1) • Insert a 3V Li battery (CR 2032) into the tray of the door, battery text facing up. (Picture 2) • Slide the battery holder back into the remote control; it is now ready for use. Operation of the remote control Remote control panel There are six function keys on the remote control and their functions match those on the control panel of the heater. When operating the remote control, always point the remote towards the display window of the heater; the signal distance is approx. 6 meters.
• Use a soft cloth/duster to wipe away the dust. If you use water for cleaning, please make sure the air filter is completely dried before placing the filter back into the unit. TEcHNIcAl spEcIFIcATIoNs Model No. TFH LED Voltage: 220-240V AC, 50Hz Wattage: Low: 1200W/ High: 2000W...
Page 11
WARRANTY cARD This Fan Heater is warranted for one year against all manufacturing defects from the date of sale. In the event of any complaint, please contact your nearest Company Service Centre or call at our Toll Free no: 1800-1033-111. This Warranty is valid only when… 1. The Fan Heater has not been opened or tempered with, by any unauthorized person.
Need help?
Do you have a question about the TFH LED and is the answer not in the manual?
Questions and answers