Page 2
You are now the proud owner of Usha Heat Convector. Innovatively designed, using only the highest quality material and components, your Usha Heat Convector is designed for years of trouble free performance. Please read this Instruction Manual carefully before using and keep it cautiously after reading for future reference.
Page 3
16. Do not damage and do not kink the power cord. 17. Before cleaning the appliance or carrying out any maintenance switch off the whole system. If the appliance is not functioning, switch it off without tampering it. If any repair is required please contact Usha Care.
IDEntIFIcatIon oF Parts tEcHnIcal Data Model No. FH-423 FH-812 T Thermostat Thermal cut-out Power Supply 230V AC, 50 HZ SINGLE PHASE Wattage (W): Heating element 1st position 1000 2nd position 1330 2000 3rd position 2000 Motor Wattage: High speed(W) Low speed(w) RPM: High speed 2400 2400...
Page 5
For best results keep the Heat convector away from walls and curtains. Maintain minimum distances at all sides as shown in the figures. Thermostat setting Keeping in view customer requirements, the USHA Heat Convector FH 812T designed with a thermostat to maintain the desired temperature. For this follow the steps given below: Step 1 Switch ON the Heat Convector by keeping it in upright position.
Page 6
Try to keep curtains, furniture and inflammable objects away from the flow of hot air. • For cleaning, ensure that the mains are disconnected. Allow the heater to cool for 10 minutes and wipe with a damp cloth. IMPortant PLEASE DO NOT COVER ENTRY AND EXIT VENTS. In case of any defect do not tamper with the appliance yourself Contact Usha Care.
Page 7
WarrantY carD This appliance is warranted for 1 year against all manufacturing defects from the date of sale. In the event of any complaint, please contact Usha Care at Toll Free No. 1800 1033 111. the warranty is valid only when: The appliance has been installed, used and maintained in accordance with the instruction manual.
Need help?
Do you have a question about the FH 423 and is the answer not in the manual?
Questions and answers