Locations Of Controls - Sylvania SRCD286 Instructions Manual

LOCATIONS OF CONTROLS

1 Volume Control
2 Open CD Door Button
3 Cassette STOP Button
4 Cassette F.FWD Button
5 Cassette REWIND Button
6 Cassette PLAY Button
7 Cassette RECORD Button
8 Cassette EJECT Button
9 CD Door
10 Dial Pointer
11 FM Antenna
12 Carry Handle
13 BAND selector
14 Tuning Control
15 CD PROGRAM Button
16 CD SKIP/SEARCH FORWARD Button
17 CD SKIP/SEARCH BACKWARD Button
18 CD REPEAT Button
19 CD PLAY/PAUSE Button
20 CD STOP Button
21 Cassette Compartment
22 Power Indicator
23 LED Display
24 Speaker
25 REPEAT Indicator
26 PLAY/PAUSE Indicator
27 FUNCTION Selector
28 HEADPHONE Jack
29 Aux-in Jack
30 Battery Door
31 AC Socket
- EN 4 -
AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable if you have wet hands.
2. If you are not planning to use the unit for an extended period of time, disconnect the power
cable from the wall outlet.
3. When disconnecting the power cord from the wall outlet. In order to avoid damage to the power
cord and electric shock, do not pull on the cord; pull firmly at the base of the plug.
BATTERY OPERATION
Disconnect the AC Cord completely. Open the Battery Compartment Door and insert six "C" size
batteries into the battery compartment with the battery polarity matching the polarity as shown inside
the battery compartment.
RADIO OPERATION
1. Set the FUNCTION Selector to the RADIO position.
2. Slide the BAND Selector to the AM or FM position.
3. Turn the TUNING Control to your desired radio station.
4. Adjust the sound level by rotating the VOLUME Control.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit
has a built-in antenna, turn the whole unit for the best reception.
CD FUNCTION
To play a CD, please follow these steps.
1. Set the FUNCTION Selector to the CD position.
2. Insert the CD disc in the CD compartment and close the CD door, the unit will start reading the
disc, the LED display will show the total number of tracks of the entire disc after reading.
3. Press the CD PLAY/PAUSE button to start playing the CD.
4. Adjust the VOLUME Control to the desired volume level.
5. Press the CD STOP button, to stop playing the CD.
Skip Mode
1. During play or pause mode, if the CD SKIP/SEARCH FORWARD button is pressed, it will go to
the next track and display the track number on the LED Display. If in play mode, the next track
will begin to play. If in pause mode, it will remain paused.
2. During play or pause mode, if the CD SKIP/SEARCH BACKWARD button is pressed once, it
will go back to the beginning of the track and display the number on the LED Display. If in play
mode, the next track will begin to play. If in pause mode, it will remain paused.
3. During play or pause mode, if the CD SKIP/SEARCH BACKWARD button is pressed twice, it
will go to the previous track.
- EN 5 -