Assembly Instruction - Sears C249 30437 0 Owner's Manual

This manual is designed to help you easily assemble, adjust and use this machine. Please read this
manual carefully. For the sake of familiarizing yourself with the parts identified in the instruction, first
study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list for help
to identify the parts.

Assembly Instruction

5
STEP 1
Attach the rear stabilizer (37) with end
caps (36) to the rear of the main frame
(64), securing with two carriage bolts (38),
two curve washers (5) and two cap nuts
(4).
Attach the front stabilizer (81) with
transportation wheels (79) to the main
frame (64) securing with two carriage
bolts (38), two curve washers (5) and two
cap nuts (4).
STEP 2
Connect the extension sensor wire (68)
from the main upright (70) to the sensor
w/wire (65) from the main frame (64).
Connect the tension cable from the tension
control (71) to the tension control cable
(66) from the main frame (64). See Inset.
Insert the main upright (70) into the main
frame (64). Secure using four hex head
bolts (69) and four curve washers (5)
which are pre-assembled on the frame
(64).
Hand tighten only.