Service Mode In; Display Specification Of The Service Mode - Pioneer DV-220V-K Service Manual

5

6.2 SERVICE MODE IN

QQ
3 7 63 1515 0
Service Mode Functional Specification
Service mode entry
In the power ON state, press the [ESC] key and [TEST] key of the Service remote control unit.
• Light the all FL and LEDs.
• OSD displays test mode.
Note:
* When pressing the keys of something, the FL displays "NO DISC" and the LED lighting disappears.
Release the Service mode
• Turn off the power.
• Press the [ESC] key of the remote control unit.
LD ON
DVD : Press the [TEST] and [1] keys in order, and turn on the laser diode (650n).
CD : Press the [TEST] and [4] keys in order, and turn on the laser diode (780n).

6.3 DISPLAY SPECIFICATION OF THE SERVICE MODE

Not used
Not used
TE
L 13942296513
Not used
1 Address indication
The address being traced is displayed in number.
(as for the DVD, indication of decimal number is
possible.)
DVD : ID indication (hexadecimal number, 8 digits)
CD : ID indication
2 Code indication of remote control unit [R − ∗ ∗ ∗ ∗]
In case of double code, display a 2nd code.
3 Main unit keycode indication [K − ∗ ∗]
5 Tracking status [TRKG − ∗ ∗ ∗]
Tracking on : [ON] Tracking off : [OFF]
6 Spindle status [SPDL − * * *]
[OFF], [CLV]
7 Mechanism (loading) position value [M − ∗ ∗]
Unknown
Open state
Close state
During opening : [12]
During closing : [22]
8 Slider position [S − ∗ ∗ ∗ ∗]
www
In Side Switch ON: [01] In Side Switch OFF : [00]
* Because there is no slider position switch on this
Drive Mechanism.
.
9 Output video system [V − ∗ ∗ ∗ ∗]
NTSC system
PAL system
Automatic setting : [AUTO]
5
http://www.xiaoyu163.com
6
Character in bold : Item name
: Information display
1
5
6
12
10
11
[∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]
[∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]
Not used
: [01] or [41]
: [04]
: [08]
x ao u163
y
i
: [NTSC]
: [PAL]
6
http://www.xiaoyu163.com
2 9
8
Not used
Q Q
3 6 7 1 3
Scart terminal output [SK − ∗ ∗]
(Display only the WY model which can do the output
setting of scart terminal.)
VIDEO
S-VIDEO : [01]
RGB
a Disc sensing [DSC − ∗ ∗ ∗]
The type of discs loaded is displayed.
[DVD], [CD ], [VCD], [
b Jitter value [J − ∗ ∗ ∗ ∗]
c Version of the FL controller [FL: ∗ ∗ ∗ ∗]
d Region setting of the player [REG: ∗]
Setting value : [1] to [6]
e Destination setting of the FL controller
[MDL: ∗ ∗ ∗ ∗ / ∗ ∗ ∗]
Four characters in the front represent code 01.
Three characters in the back represent the destination
code.
J: /J, K: /KU, /KC, /KU/KC, R: /RL/RD, RAM : /RAM,
Not used
LB: /LB, WY: /WY
f Version of the flash ROM [VERSION: ∗∗∗∗∗∗∗∗]
.
DV-220V-K
7
9 4 2 8
2
3
7
Not used
8
9
13
14
15
1 5 0 5 8 2 9 9 4
: [00]
: [02]
]
Note:Don't use it.
m
co
7
8
9 9
A
B
C
2 8 9 9
D
Not used
E
Not used
F
25
8