Related Manuals for Stone Saw Devil MS1
Summary of Contents for Stone Saw Devil MS1
- Page 1 OPERATOR MANUAL MODEL: MS1 and MS2 SAW DEVIL ® Portable / Professional Masonry Saw A 100% employee-owned American manufacturer REVISION: B 2/2003 P/N 56420...
-
Page 3: Table Of Contents
TABLE of CONTENTS Masonry Saws TABLE OF CONTENTS ..................3 USER INFORMATION ..................4-5 Foreword ........................4 Service Data ......................4 Warranty ........................5 HEALTH & SAFETY ..................6-8 Safety ......................... 6 Safety Precautions ....................7-8 TECHNICAL DATA ..................9-13 Specifications ...................... -
Page 4: User Information
Location of above information: Stone Construction Equipment, Inc. is not 1. Information on S/N tag. liable for the function of the machine when used in an improper manner or for other 2. -
Page 5: Warranty
No claim will be allowed for products lost or damaged in transit. Such claims should be filed with the carrier within fifteen days. Effective July 2002. Stone Construction Equipment, Inc. • 8662 Main Street, P . O. Box 150 •... -
Page 6: Health & Safety
HEALTH & SAFETY Safety SAFETY These machines are designed to carry out the func- tion of flat sawing material of the non-cohesive, bitu- minous and granular varieties. If used correctly they will provide an effective and safe means of sawing and meet the appropriate perfor- mance standards. -
Page 7: Safety Precautions
HEALTH & SAFETY Safety Precautions Before using this equipment, study this entire manual When warning decals are destroyed or missing, con- to become familiar with its operation. Do not allow tact the Manufacturer immediately at 1-800-888-9926 untrained or unauthorized personnel, especially chil- for replacement. -
Page 8: Health & Safety
HEALTH & SAFETY Safety Precautions Avoid contact with hot exhaust systems and engines. Allow engine to cool before performing any repairs. Never operate unit in a poorly ventilated or enclosed area. Avoid prolonged breathing of exhaust gases. Eye protection required when operating this equipment. Head protection required when operating this equipment. -
Page 9: Technical Data
TECHNICAL DATA Specifications - Block Saws Model Dimensions 190 lbs (87.3) 445 lbs (216) Weight (kg) 37" x 21" x 33" 48" x 25" x 71" Dimensions (LxWxH)† (cm) (122 x 64 x 180) (94 x 54 x 84) 62.5" high on electric 14"... -
Page 10: Electrical Power Supply Connection
TECHNICAL DATA Power Supply/Sound Chart Electrical Power Supply Connection Connecting wires or extension cords should be as short as possible and one piece. In no case should the connecting wires or extension cords be longer than shown in the following chart. Motor Voltage 50”... -
Page 11: Torque Chart - Imperial
TECHNICAL DATA Torque Chart - Imperial SAE GRADE 5 SAE GRADE 8 Coarse Thread, Zinc-Plated Coarse Thread, Zinc-Plated SIZE TORQUE SIZE TORQUE ft. lbs. ft. lbs. 1/4 - 20 (.250) 1/4 - 20 (.250) 5/16 - 18 (.3125) 5/16 - 18 (.3125) 3/8 - 16 (.375) 3/8 - 16 (.375) 7/16 - 14 (.4375) -
Page 12: Torque Chart - Metric
TECHNICAL DATA Torque Chart - Metric Monthly, inspect all hardware on this equipment and engine/motor. Loose hardware can contribute to early component failure and poor performance. Use the torque chart below as a general guideline and keep all hardware tight. Note: Some hardware is used to retain parts that have to move freely for correct operation of this unit. -
Page 13: Hardware Key
TECHNICAL DATA Hardware Key VR005A ZN = ZINC PLATED BLK = BLACK OXIDE FINISH - 13 -... -
Page 14: Operations
1-1/2hp to 5hp electric and gas, and 8hp and 11hp gasoline block house professionals. You will find a Stone Saw DevilTM to fit a wide variety of job applications. Upon receipt of your Saw Devil™, CAREFULLY CHECK FOR ANY FREIGHT DAMAGE. -
Page 15: Installation Instructions
The pump plug must be kept out of contact with water both in the water pan and on the ground. Stone single phase masonry saws are furnished with the correct approved NEMA configuration plug on the motor pigtail—the plug appropriate for the voltage to which the motor is set. -
Page 16: Maintenance
MAINTENANCE Important Note IMPORTANT ERSON TTEMPTING OLLOWING AINTENANCE ASKS UTHORIZED ALL S NDERSTOOD ECTIONS ITHIN ANUAL - 16 -... -
Page 17: Cleaning/Before Storing/Daily
If you have motor problems, contact your dealer (or Blade shaft bearing should be tight--no free play Stone directly in an emergency) for the name of your side-to-side or up-and-down. nearest Authorized Service Dealer. If the motor is... -
Page 18: Service Check List
Daily Continued/Service MAINTENANCE Check List Clean the water reservoir pan at least once a day— • On gas units make sure kill switch is functional twice a day in heavy cutting—and refill with clean while running. water. Run clean water through your saw at the end of each day to extend the life of pumps and other components. -
Page 19: Troubleshooting
MAINTENANCE Troubleshooting CAUSE REMEDY PROBLEM UNEVEN SEGMENT WEAR • (In wet cutting) Insufficient water (usually on • Flush water system. one side of blade). • Check flow to both sides of blade. • Equipment defects also can cause the • Replace bad bearings, worn arbor segments to wear unevenly. - Page 20 MAINTENANCE Troubleshooting REMEDY PROBLEM CAUSE BLADE WOBBLES • Blade is on a damaged or worn saw. • Check for bad bearings, bent shaft, • Worn collar. or worn mounting arbor. • Blade runs at an incorrect speed. • Check collars/flanges to make sure •...
- Page 21 MAINTENANCE Troubleshooting CAUSE REMEDY PROBLEM • Install new blade shaft bearings or • Shaft bearings are worn. BLADE WORN OUT OF ROUND blade shaft, as required. • Surges occur because engine is • Tune engine according to not properly tuned. manufacturer's manual.
-
Page 22: Service Record
MAINTENANCE Service Record Model No. ______________________________________ Serial No. ___________________________________ SEE ENGINE MANUAL FOR FREQUENCY AND PART NUMBERS. Date Engine Engine Fuel Spark Transmission Oil Filter Filter Filter Plugs Fluid - 22 -... -
Page 23: California Proposition 65
CALIFORNIA PROPOSITION 65 WARNING: Saw- ing and engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. - Page 24 The Way It Ought To Be. Stone Construction Equipment, Inc. P .O. Box 150, Honeoye, New York 14471 Phone: 1-800-888-9926 Fax: 1-585-229-2363 e-mail: sceny@mcimail.com www: stone-equip.com A 100% employee-owned American manufacturer © 1997 Stone Construction Equipment, Inc. Printed in U.S.A. GPC 1/98...
Need help?
Do you have a question about the Saw Devil MS1 and is the answer not in the manual?
Questions and answers