Vcr Tape Recording; Timer Recording - LG LDX-514 Owner's Manual

VCR T
VCR T
Basic Instructions
1. Turn on the DVD+VCR and TV.
2. Tune the TV to the DVD+VCR output channel
3. Insert a video cassette with the safety tab intact.
4. Select the desired channel using CH/TRK (v/V).
5. If you are recording from another source via
6. Set the desired recording speed (SP or SLP) by
7. Set the MTS mode (STEREO or SAP). Set the
8. Press REC/ITR (z) and recording starts. The
9. Press STOP (x x ) to stop recording. If the tape
Tips:
•
•
24
Downloaded From Disc-Player.com LG Manuals
ape Recording
ape Recording
(CH 3 or 4) or if a direct VIDEO/AUDIO connec-
tion is made between the DVD+VCR and the TV,
set the TV's source selector to VIDEO.
audio/video input jacks (at the rear or front panel),
select LINE1 or LINE2 using INPUT.
pressing SPEED. This DVD+VCR is not designed
to record in LP mode.
BROADCAST TYPE option to SAP if applicable.
REC indicator appears in the display window. If a
cassette with no safety tab is loaded, the cassette
is ejected.
reaches the end before STOP (x x ) is pressed, the
DVD+VCR stops, rewinds and ejects the tape.
Use PAUSE/STEP (X) for best results when making
changes while recording. For example, if you want to
change channels while recording, first press
PAUSE/STEP (X) to put the unit in pause mode, select
the desired channel on the DVD+VCR, and then press
PAUSE/STEP (X) again to resume recording.
If you wish DVD playback during the VCR recording,
press DVD to change DVD mode and perform the DVD
playback.
To pause the recording
1. Press PAUSE/STEP (X) to pause the tape during
recording. The REC indicator flashes in the dis-
play window.
2. When you want to continue recording, press
PAUSE/STEP (X) or press REC/ITR (z). After 5
minutes in PAUSE mode, the DVD+VCR stops
automatically to protect the tape and the video
heads.
To record one TV program while watching
another
1. Press TV/VCR to select the TV mode during
recording. The TV indicator appears.
2. Using the TV, select the channel to be viewed.
T imer Recording
T imer Recording
For unattended recording, you must input the
channels to be recorded and the starting and ending
times.
Things to know before starting
If you try to set the program timer before setting
the clock, "PLEASE SET THE CLOCK" appears
for a moment and then CLOCK menu appears on
the TV screen. Set the time and date before pro-
ceeding.
1. Turn on the DVD+VCR and the TV.
2. Be sure the TV is set to the DVD+VCR output
channel (3 or 4).
3. Make sure the TUNING BAND in the TUNING
menu is set appropriately (TV or CATV).
4. Press MENU and the MAIN menu appears.
5. Use v/V to choose the PROGRAM menu and
press ENTER.
If eight programs are already entered, the FULLY
PROGRAMMED message appears for a moment
and then PROGRAM 1 appears on the TV
screen.