Management - Acer X1110 Series User Manual

VGA OUT
(Standby)
(for X1110A/
X1210/X1210A/
X1210K/X1210S/
X1213/X1216)
Reset

Management

ECO Mode
Downloaded From projector-manual.com Acer Manuals
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
Press to change "Administrator Password".
•
The factory default of "Administrator Password" is
•
"1234".
If you forget your administrator password, do the following
to retrieve the administrator password:
Enter the unique 6-digit "Universal Password" which is
•
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
If the Security Card is lost, please contact your local Acer
•
service center.
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN (or
VGA IN 1) and VGA OUT sockets are correctly connected to the
devices.
Enabling this function slightly increases the standby
power consumption.
Press after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
Choose "On" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
25