Acer X1110 Series User Manual page 39

Hide thumbs Also See for X1110 Series:
Table of Contents

Advertisement

3
4
5
6
7
Downloaded From projector-manual.com Acer Manuals
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
The screen of the
notebook
computer is not
displaying your
presentation
Image is unstable
or flickering
Image has vertical
flickering bar
Image is out of
focus
Press "RESYNC" on the control panel or remote
control.
For an incorrectly displayed image:
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
If you are using a Microsoft
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
If you are using an Apple
notebook: In System Preferences, open Display and
select Video Mirroring "On."
Use "Tracking" to correct it. Refer to the "Image"
section for more information.
Change the display color setting on your computer.
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 3.9 to 37.2 feet (1.2 to 11.3
meters) from the X1110/X1110A/X1210/X1210A/
X1210K/X1213/X1216 projector, or 2.3 to 18.0 feet
(0.7 to 5.5 meters) from the X1210S projector. Refer
to the "How to Get a Preferred Image Size by
Adjusting Distance and Zoom" section for more
information.
®
®
Windows
based
®
®
Mac
OS based
29

Advertisement

Table of Contents
loading

Table of Contents