Setup
Loose Parts
Note: Use the chart below to verify all parts have been shipped.
Description
Rear Wheels
Retaining rod
Bolt, 5/16 x 1 in.
Locknut, 5/16 in.
Control lever—right
Control lever—left
Bolt, 3/8 x 1 in.
Spring washer, 3/8 in.
Grass Deflector
Bolt, 5/16 x 7–1/2 in.
Locknut, 5/16 in.
Spacer
Spring
Blowout baffle—right
Blowout baffle—left
Screw
Side Discharge Blade
Key
Operator's Manual
Engine Operator's Manual
Parts Catalog
Registration card
Installing the Drive Wheels
1. Uncrate mower.
2. Remove wheel bolts or nuts from rear wheel hubs.
3. Align holes. Mount drive wheels with the valve stem
to the outside of the traction unit.
4. Secure using wheel bolts or nuts provided. Torque to
95 ft.-lb. (128 N M).
Checking the Tire Pressure
Check the air pressure in the front and rear tires (Fig. 2).
Qty.
Use
2
Installing the drive wheels
1
1
Installing the seat retaining rod
1
1
1
Installing the motion control levers
4
4
1
1
1
Installing the grass deflector
1
1
1
1
Using blowout baffle
9
3
Using side discharge blades
2
1
Read before operating machine
1
1
1
Fill out and return to Toro
Pressure: 13 psi (90 kPa)
15