Adjusting The Handle Height - Toro 20835 Operator's Manual

1. Cutting-height lever
Note: The approximate cutting height settings are A= 25
mm (1 inch); B= 38 mm (1-1/2 inch); C=51 mm (2 inches);
D=64 mm (2-1/2 inches); E=83 mm (3-1/4 inches); F=95
mm (3-3/4 inches); and G=108 mm (4-1/4 inches).
Figure 10

Adjusting the Handle Height

You may raise or lower the upper handle to a position
comfortable for you.
Rotate the handle lock, move the handle to 1 of 3 positions,
and lock the handle into position (Figure 11).
1. Handle lock
9
Figure 11
2. Handle positions