Changing Your Radio Setup - PURE One Owner's Manual

Changing your radio setup

The following options are available in DAB, FM or both.
Menu
Backlight
Choose whether the screen backlight is on, off, or turns on when a button is pressed, both
when the unit is on (Active) and in Standby.
DRC value
DRC (Dynamic Range Control) value makes the quieter sounds in a DAB broadcast easier to
hear at low volume or in a noisy environment. Check with the broadcasters to find out if they
use DRC.
DRC full
DRC half
DRC off
Station Order
Alphanumeric
Active station
Multiplex
Trim stn. list
Autotune
Scans all DAB Band III frequencies for stations and adds any new ones to the station list. To
stop an Autotune press the dial.
FM tuning mode
Changes how you tune from one station to another.
Seek Tune
Manual Tune
FM stereo mode
Changes between stereo and mono reception - mono may be clearer for stations with weak
signals.
Upgrade
Upgrade your radio using a PC connected to the USB socket. Upgrades may be issued to
provide enhanced functions or improve performance. The version number of your radio is
displayed on the top line.
Register your product and include an e-mail address to receive notification of product
upgrades or visit our website at www.pure.com/support.
To upgrade, select the Upgrade option and follow the instructions provided with the upgrade.
To exit the upgrade menu press the Menu button.
Applies the DRC level as sent with the broadcast.
DRC level is set to half that sent with the broadcast.
Any DRC level broadcast will be ignored.
Lists all stations in alphanumeric order.
Lists active stations first on the station list.
Lists stations in groups according to their multiplex.
Removes inactive stations from the station list.
Automatically searches for the next FM station with a strong signal.
Lets you manually step through the frequency range in steps of 0.05 MHz.
9