Table of Contents
Advertisement
Sending Images to a Registered Web Service
110
3
Choose [
●
Following steps 2 – 3 in "Importing
Images into a Smartphone" ( = 9 9),
choose [
], and then press the [ ]
button.
4
Connect to an access point.
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Authenticate], and then
press the [ ] button.
●
Connect to the access point as described
in steps 4 – 6 in "Using Another Access
Point" ( = 1 07).
●
Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
●
Keep this display on and available for
viewing until step 5 is complete.
5
Enter the authentication code.
●
On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
●
A six-digit confirmation number is
displayed.
6
Check the confirmation numbers
and complete the setup process.
●
On the second screen in step 4, press
the [ ][ ] buttons or turn the [ ] dial
to choose [OK], and then press the
[ ] button to display the confirmation
number.
●
Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
].
Advertisement
Table of Contents
