Table of Contents
Advertisement
DISMANTLING INSTRUCTIONS
Dismantling of the Rear Portion
1) Remove 11 screws A and B as indicated to remove the
Rear Cabinet.
2) Remove 2 screws C as indicated to loosen the Speaker
Wire Holder.
3) Remove 2 screws D as indicated to loosen the Speaker
Board .
4) Remove 2 screws E as indicated to loosen the AUX IN
jack.
Figure 1
Figure 2
2-1
Dismantling of the Front Boards and CD Door
1) Loosen 2 screws F1 to remove the DAB Adaptor Board.
2) Loosen 3 screws G to remove the CD Mechanism Holder
Bracket and loosen 5 screws F2 and F3 as indicated to
remove the Main Board.
3) Remove 3 screws H as indicated to loosen the Gear Motor
Module.
4) Loosen 4 screws I (see Figure 4) to remove the Key_C
Board.
5) Loosen 2 screws J (see Figure 4) to remove the Display
Board.
Figure 3
6) Loosen 4 screws K (see Figure 3) to remove the Power
Key Board.
Loosen 8 screws L (see Figure 3) to remove the Volume
7)
Board.
8)
Loosen 8 screws M (see Figure 3) to remove the Door Eject
Lever Bracket Right/Left, then remove CD door.
Figure 4
DISMANTLING INSTRUCTIONS
Repair Hints & Service Positions
Note: The flex cables are very fragile, care should be taken
not to damage them during repair. After repair, be
very sure that the flex cables are inserted properly
into the flex sockets before encasing, otherwise faults
may occurs.
Service position A
Service position B
2-1
Advertisement
Table of Contents
