Cleaning And Maintenance; Cleaning My Withings Go; Replacing The Battery - Withings Go Installation And Operating Instructions Manual

Cleaning and Maintenance

Cleaning my Withings Go

We recommend that you regularly wash the wristband, whether you wear it all the time, or
just when you sleep. To do so, perform the following steps:
1. Remove your Withings Go from the wristband.
2. Run the wristband under water and rub it with hypoallergenic soap to clean it.
3. Rinse the wristband with water.
4. Dry the wristband with a soft cloth.
5. Allow the wristband to dry completely before wearing it again.
Failure to clean the wristband regularly may cause skin irritations.
If you have to clean the Withings Go itself, use a lint-free cloth moistened with water
to clean the casing.

Replacing the Battery

Your Withings Go has an autonomy of up to 8 months using a standard CR2032 battery.
If you need to replace the battery, perform the following steps:
1. Turn it over so that you can see the back case cover.
2. Place the tool provided with the Withings Go in the groove of the back case and turn
counterclockwise so that the marking at the top of the back case is in line with the dot.
Alternatively, you can use a coin to do so. If you do so, be careful not to damage
the groove.
3. Replace the battery.
Withings Go
v1.0 | March, 2016
EN - 32