Safety And Instructional Decals; Setup; Unfolding The Handle - Toro 20319 Operator's Manual

Safety and Instructional
Decals
Important: Safety and instruction decals are located
near areas of potential danger. Replace damaged decals.
1. Warning—read the Operator's Manual.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Cutting/dismemberment hazard of hand or foot, mower
blade—disconnect the spark-plug wire and read the
instructions before servicing or performing maintenance.
4. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts and keep all guards
and shields in place.
5. Cutting/dismemberment hazard of hand or foot, mower
blade—do not mow up and down slopes, only mow across;
stop the mower and engine, pick up debris before operating;
look behind and down when reversing.
94-8072
117–2718
117-4143

Setup

Important: Remove and discard the protective plastic
sheet that covers the engine.
1

Unfolding the Handle

No Parts Required
Procedure
WARNING
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Remove the handle knobs from the machine housing
(Figure 3).
Important: Route the cables to the outside of the
handle as you install the handle.
1. Handle knob (2)
2. Move the handle to the operating position.
4
1
G021276
Figure 3