Panasonic NN-C2000P Service Manual page 11

NN-C2000P / NN-C2000W
Balance of cooking time (T2 time)
The balance of cooking time which is called T2 time, can be
calculated by the following formula.
T2 time (in sec.) = T1 time × K factor
NOTE: Remember, the T1 time starts after the Start pad is
tapped. The coefficient K is programmed into the
microprocessor memory and they are listed in the
following tables along with the P1 and P2 powers.
NOTE: When "More" or "Less" pad is selected, the K factor
varies resulting in T2 time to be increased or decreased.
NOTE: For T2 time of Category Casserole, HEATER
operation programmed.
Example of calculating theT2 time
Example 1: If the T1 time is measured to be 2 minutes and 40
seconds, and the Auto Sensor program selected is Sensor
Reheat.
T2 = T1 × K
= 2 min. and 40 sec. × 0.3
= 48 sec.
11