Pc Set Up; Installing Usb Cable; Installing Persono Suite Software; Making A Test Call With Pc - Plantronics SAVI OFFICE WO100 User Manual

6

PC Set Up

6.1 Installing USB Cable

1 Connect the USB cable to the USB port on the back of
the base.
2 Connect the other end of the USB cable to the USB port
of the PC.

6.2 Installing PerSono Suite Software

1
In the animated setup guide located on the CD, select
Step 6.2 Installing PerSono Suite Software.
2 Click on the graphic of the CD labeled "PerSono Suite
Software".
3
Follow installation instructions shown on screen.
Plantronics Savi User Guide

6.3 Making a Test Call with PC

1 Ensure the PerSono Suite software is running on your
PC. You will see a headset icon in the lower right portion of
the PC tray bar when PerSono Suite software is running.
2
With your headset on, press the PC talk button on
the base.
3 Dial the number using your softphone application.
4
Adjust listening and speaking volume over the PC as
follows:
For Windows ® XP Systems-
Go to the "Voice" tab of the "Sounds and Audio Devices"
option in your PC control Panel.
®
For Windows Vista Systems-
Go to the "Playback" tab for listening volume or
"Recording" tab for speaking volume of the "Sound" option
in your PC control panel.
5
You can also fine tune the listening volume on the
headset by pushing the call control button up to
increase the volume and pushing down to decrease the
volume.
6 To end the test call, press the call control button on
the headset.
12