Table of Contents
Advertisement
QUICKSTART GUIDE
1. Unbox the unit. The box should contain: iP1520, manual, warranty card
and Juice Goose promotional material.
2. With your PC on and booted up, connect the iP1520 to your PC using a
suitable cable. If the iP1520 is connected to a network router use a stan-
dard CAT 5 cable, if connected directly to a PC use a CAT 5/6 crossover
cable.
3. Plug the iP1520 power cord into a live AC receptacle, such as a wall
outlet, with a twenty amp capacity (i.e. NEMA 5-20R).
4. The iP1520 will take about 30 seconds to boot up and configure itself at
which point the Network light on the front of the unit will illuminate, indicat-
ing network connectivity. If the Network light blinks or does not light at all
check the cable connections.
5. Open up your web browser and type in the following default IP address
to access the iP1520 : http://juicegoose.
6. At this point you will be prompted to log into the iP1520.
Initial login will be:
Username: admin
Password: juicegoose
7. You will be presented with the control page where you can control the
iP1520 PODS by clicking on the buttons or using the Sequence field by
entering the value in seconds and clicking the Sequence UP button.
8. To setup a specific IP address and change passwords for the admin/
user account click on the 'iP1520 Management' link at the top right of the
page.
9. On the iP1520 management page you can configure the Admin and
User passwords as well as configure the required IP address and any net-
work/RS232 settings you require. This is detailed beginning on page 6. See
your system administrator if you have one for help with configuration.
Page 2
Advertisement
Table of Contents
