Table of Contents
Advertisement
Set your reference point from the settings under Outdoor.
3.3.1 FusedAlti
TM
FusedAlti
provides an altitude reading that is a combination of
GPS and barometric altitude. It minimizes the effect of temporary
and offset errors in the final altitude reading.
NOTE: By default, altitude is measured with FusedAlti during
exercises that use GPS and during navigation. When GPS is switched
off, altitude is measured with the barometric sensor.
3.4 Backlight
The backlight has two modes: automatic and toggle. In automatic
mode, the backlight comes on with any screen touch or button
press.
In toggle mode, you turn the backlight on with a two-finger tap.
The backlight stays on until you tap with two fingers again.
By default, the backlight is in automatic mode. You can change the
backlight mode as well as the backlight brightness from the settings
under General » Backlight.
16
Advertisement
Table of Contents
