Connecting To A Network Router; Wireless Network - Samsung BD-H5900 User Manual

Connecting to a Network Router

You can connect your player to your network router using one of the methods illustrated
below.
To use the AllShare network functionality, you must connect your PC to your network as
shown in the illustrations.
The connection can be wired or wireless.
Wired Network
Or
✎
NOTES
Internet access to Samsung's software update server may not be allowed, depending on
■
the router you use or your ISP's policy. For more information, contact your ISP (Internet
Service Provider).
DSL users, please use a router to make a network connection.
■
Broadband modem
(with integrated router)
Broadband
service
Router
Broadband
service
Broadband
modem

Wireless Network

✎
NOTES
If your wireless router supports DHCP, this player can use a DHCP or static IP address to
■
connect to the wireless network.
Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
■
The player supports only the following wireless security key protocols:
■
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Select a channel on the wireless router that is not currently being used. If the channel set
■
for the wireless router is currently being used by another device nearby, it will result in
interference and communication failure.
If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption
■
type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a
connection in compliance with new Wi-Fi certification specifications.
Wireless LAN, by its nature, may cause interference, depending on the operating
■
conditions (router performance, distance, obstacles, interference by other radio devices,
etc).
Wireless Router
Broadband
service
9