Connecting To A Network Router - Samsung BD-J5700 User Manual

Connecting to a Network Router

You can connect your player to your network router using one of the methods
illustrated below.
To use the DLNA network functionality, you must connect your PC to your network
as shown in the illustrations.
The connection can be wired or wireless.
Wired Network
Or
NOTES
✎
Internet access to Samsung's software update server may not be allowed, depending on the router you use
`
or your ISP's policy. For more information, contact your ISP (Internet Service Provider).
DSL users, please use a router to make a network connection.
`
Broadband modem
(with integrated router)
Broadband
service
Router
Broadband
service
Broadband
modem
Wireless Network
NOTES
✎
If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the
`
wireless network.
Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
`
The player supports only the following wireless security key protocols:
`
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Select a channel on the wireless router that is not currently being used. If the channel set for the wireless
`
router is currently being used by another device nearby, it will result in interference and communication
failure.
If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router
`
to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with new Wi-
Fi certification specifications.
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router
`
performance, distance, obstacles, interference by other radio devices, etc).
Wireless Router
Broadband service
9