Scc-641(P) Installation - Samsung SCC-641 Owner's Instructions Manual

SCC-641(P) Installation

1. [Figure 1] Install the structure on the ceiling.
(Refer to Installation reference for the Length of the structure)
* Built in by the builder of the structure
2. Make a hole in the ceiling where the camera will be installed.
(The hole should be about Φ180)
3. [Figure 2] Assemble the BRKT-ANCHOR on the ceiling and screw the 4 bolts in.
2-7
[Figure 1]
Lenght of ceiling Hole
[Figure 2]
4. [Figure 3,4] Connect the various cables to the CAMERA ADAPTER. (See page 2-6)
[Figure 3]
5. [Figure 5] Match the BRKT-ANCHOR and CAMERA ADAPTER and use 4screws
x
(PH M4 8) to assemble them.
[Figure 4]
[Figure 5]
E
2-8