Table of Contents
Advertisement
Quick Links
GENEE TECHNOLOGIES
INDIA PRIVATE LIMITED
An ISO 9001:2008 certi ed company
®
Classroom for the Future
8100
®
8100
@
User manual
Tel: 0124-4934500
Email: info.india@geneeworld.com
Website: www.genee-india.com, www.geneeworld.com
Fax: 0124-4934521
WWW
Plot No. 698, Udyog Vihar, Phase V, Gurgaon, Haryana-122016, India
Advertisement
Table of Contents
Related Manuals for Genee World GV8100
Summary of Contents for Genee World GV8100
- Page 1 GENEE TECHNOLOGIES INDIA PRIVATE LIMITED An ISO 9001:2008 certi ed company ® Classroom for the Future 8100 ® 8100 User manual Tel: 0124-4934500 Email: info.india@geneeworld.com Website: www.genee-india.com, www.geneeworld.com Fax: 0124-4934521 Plot No. 698, Udyog Vihar, Phase V, Gurgaon, Haryana-122016, India...
-
Page 2: Parts Identification
PARTS IDENTIFICATION PRECAUTIONS PARTS IDENTIFICATION PRECAUTIONS Audio: Mini jack 2 MIC: Mini jack 1 PC Audio: Mini jack 2 RGB: DB15FLC2 RGB: DB15FLC2 C-Video: RCA jack 1 Output connectors S-Video: 4 pin mini Din 1 NOT THIS WAY Please follow these precautions: Audio: Mini jack 1 SPECIFICATIONS Operating System... -
Page 3: Button Instruction
POWER (Control the visualiser On/Off) Mir (V-reverse the image) Frz (Freeze the image) Neg (Display film negatives) REMOTE CONTROL disconnect the projector from the RS232 port first) and select the Baud Rate and Title (Freeze the top 1/8 of the screen) Parity based on the projector’s Baud Rate, then click the “TEST”... -
Page 4: Basic Preparations
TELE/ WIDE (Increase and decrease the magnification) with a RS232 cable Please disconnect the computer from the RS232 port first. Then BASIC PREPARATIONS FAR/NEAR (Focus near or far) use buttons on the operation panel to control the projector. 1. Use one hand to hold the base of the visualiser, use the other hand to carefully lift VOL+/VOL- (Increase or decrease the volume) The visualiser provides a 6-pin to 9-pin RS232 cable. - Page 5 computer connected with a USB connector. Step 2: Connect to the projector. 2. Connect the RS232 cable to the computer’s connector. The visualiser’s RS232 port is Step 3: Connect to a desktop computer. Click [Start] -> [Program] -> [VideoCap] -> “VideoCapx.xx” (x.xx is software’s version) located on its right side.
-
Page 6: Title Function
TITLE FUNCTION USB PORT OUTPUT MODE AND VERTICAL FREQUENCY (60Hz) OUT port to be displayed on the screen. Step 5: Connect to the second video equipment with video input. Press the “Title” button once and the image split into two parts, the upper 1/8 The RGB output can output a signal in the SVGA /XGA format. -
Page 7: Dynamic/Static Mode Switch
IMAGE REVERSION COLOUR AND B&W MODE SWITCH Click the Install Code-Writing Program button to install Code-Writing Program. When you open the capture program, but can not capture the image, please Press the “Mir” button once to V-reverse the image and the vertically mirrored Press “B&W”... - Page 8 the stage, it is not necessary to readjust the focus if you are only working with flat materials (text, photos, etc.). Only 3D objects require a focus adjustment. Press the “AUTO” button to auto focus. Press the “FAR” or “NEAR” button once to focus manually.
- Page 9 IMAGE REVERSION COLOUR AND B&W MODE SWITCH Click the Install Code-Writing Program button to install Code-Writing Program. When you open the capture program, but can not capture the image, please Press the “Mir” button once to V-reverse the image and the vertically mirrored Press “B&W”...
- Page 10 USB PORT OUT port to be displayed on the screen. TITLE FUNCTION OUTPUT MODE AND VERTICAL FREQUENCY (60Hz) Step 5: Connect to the second video equipment with video input. Press the “Title” button once and the image split into two parts, the upper 1/8 The RGB output can output a signal in the SVGA /XGA format.
-
Page 11: Controlling Projector With Visualiser
computer connected with a USB connector. Step 2: Connect to the projector. Step 3: Connect to a desktop computer. 2. Connect the RS232 cable to the computer’s connector. The visualiser’s RS232 port is Click [Start] -> [Program] -> [VideoCap] -> “VideoCapx.xx” (x.xx is software’s version) located on its right side. - Page 12 BASIC PREPARATIONS TELE/ WIDE (Increase and decrease the magnification) with a RS232 cable Please disconnect the computer from the RS232 port first. Then 1. Use one hand to hold the base of the visualiser, use the other hand to carefully lift FAR/NEAR (Focus near or far) use buttons on the operation panel to control the projector.
- Page 13 Connect the visualiser to a computer with a RS232 cable (Please POWER (Control the visualiser On/Off) REMOTE CONTROL Mir (V-reverse the image) disconnect the projector from the RS232 port first) and select the Baud Rate and Frz (Freeze the image) Parity based on the projector’s Baud Rate, then click the “TEST”...
-
Page 14: Control Panel
PARTS IDENTIFICATION PRECAUTIONS Audio: Mini jack 2 MIC: Mini jack 1 PC Audio: Mini jack 2 RGB: DB15FLC2 RGB: DB15FLC2 C-Video: RCA jack 1 Output connectors S-Video: 4 pin mini Din 1 Please follow these precautions: Audio: Mini jack 1 Operating System Window 2000/XP To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Need help?
Do you have a question about the GV8100 and is the answer not in the manual?
Questions and answers