ACONLABS ON CALL EXPRESS User Manual page 19

Press the left (◄) button to turn the meter beep "On" and "Off". Press the right
(►) button to confirm your selection.
7. Ketone Indicator: The meter comes with the Ketone indicator feature disabled.
Press the left (◄) button to switch between turning the Ketone indicator "On"
and "Off". Press the right (►) button to confirm your selection. When the
Ketone indicator is enabled, if the test result is higher than 300 mg/dl, the
symbol of "Ketone?" will appear on the display.
8. Hyper Indicator: The meter comes with the Hyper indicator feature disabled.
Press the left (◄) button to turn the Hyper indicator "On" or "Off". Press the
right (►) button to confirm your selection. When the Hyper indicator is "Off",
pressing the right (►) button will go to the next Hypo indicator set up. When
the Hyper indicator is "On", pressing the right (►) button will go to the Hyper
indicator level set up. At the Hyper level set up, press the left (◄) button to
adjust the Hyper level. Press the right (►) button to go to the Hypo indicator set up.
Note: The meter allows the hyperglycemia level to be as low as 120 mg/dl or
higher. The hyperglycemia level should be above the hypoglycemia level.
Consult your doctor before determining what your hyper blood glucose level is.
16